Développement des énergies renouvelables: le photovoltaïque sera la principale source d’énergie du nouveau système électrique
After the "double control of energy consumption" in 2021 and the power rationing and shutdown in 2022, the power rationing news came out again in Yunnan, China's major hydropower province. This is also the third round of large-scale power rationing in Yunnan after the two rounds of power rationing in September 2022. Let's explore why this happens.
Reasons for power limitation:
At the beginning of 2023, power rationing in Yunnan was increased again, mainly because the incoming water was less than expected.Due to the low rainfall in the second half of 2022, the water level of hydropower stations in Yunnan Province is generally low. However, it is worth noting that among the top ten hydropower stations in China, there are seven in Yunnan.Last year, due to the high temperature in summer, the national electricity consumption was high, and the water level of many reservoirs dropped rapidly. Since then, the water level of the reservoir has not been well replenished. Because of the large proportion of hydropower generation, the overall power supply in Yunnan Province is tight and the gap between power supply and demand is large.
Impact of power restriction:
- Capacity of production is limited
Affected by the reduction of water inflow, the constant news of power rationing in Yunnan has significantly affected the industrial capacity represented by electrolytic aluminum. An employee of a Chinese enterprise interviewed by the Securities Times • e Company: "Since the power limit in September 2022, the first round of voltage limit has reduced the capacity by 10%, the second round has reached 20%, and the new round has reduced the capacity again by 40%."
- The market price is temporarily stable
In 2022, the power rationing tide in many places in southwest China once reduced the supply of products including aluminum and industrial silicon. However, the expectation of supply reduction caused by power rationing in Yunnan has not been significantly reflected in the price of related products. As a traditional power generation method, hydropower stations will be affected by various factors, among which the water volume is the most vulnerable. So we should consider whether there are other power generation methods that can replace hydropower stations.
Classification of energy:
At present, the mainstream energy used mainly includes coal, oil and natural gas. Solar energy, geothermal energy, wind energy, marine energy, biomass energy and nuclear energy are new types of energy.
Disadvantages of traditional energy:
First, it will emit carbon dioxide when it is used, and second, the price of traditional energy will rise sharply due to external factors such as politics, mining and transportation; Therefore, the best way to develop energy is to vigorously develop new energy.
Analysis of new energy:
Wind power, nuclear power and solar power generation account for the highest proportion of new energy generation in China, second only to thermal power and hydropower in total.
- Wind power generation:
Use wind power to generate electricity. The wind energy facilities are becoming more and more advanced, and most of them are non-three-dimensional facilities, which can protect the land and ecology. However, wind power generation is not yet mature, the wind speed is unstable, and the amount of energy generated is also unstable.
- Nuclear power generation:
Power is generated by the thermal energy released by nuclear fission in the nuclear reactor. Compared with fossil fuels, it will not emit huge amounts of pollutants, cause no air pollution and aggravate the greenhouse effect. However, it will cause serious radiation pollution. If it is not handled properly, it will cause great harm to the environment and human body.
- Solar power:
We are not unfamiliar with the concept of solar energy. In simple terms, it is to convert the sun's rays into usable electrical energy. Solar energy is not only renewable, but also safe, clean and cheap. It is the first choice of renewable energy.
Advantages of solar power generation:
(1) Photovoltaic power generation has economic advantages.
With the development of science and technology and the breakthrough of human development and utilization of solar energy technology, the economy of solar energy utilization will become more obvious. If the 20th century is the century of oil, then the 21st century is the century of renewable energy (the century of solar energy).
(2) Solar energy is inexhaustible renewable energy.
According to the calculation, the life of the sun is at least 4 billion years. Compared with human history, the time that solar energy can continuously supply the earth can be said to be infinite, which determines that the development and utilization of solar energy will be the most effective way to solve the shortage and depletion of conventional energy.
(3) No pollution to the environment.
Like wind energy, tidal energy and other clean energy, solar energy hardly produces any pollution when it is developed and utilized. In addition, its unlimited reserves make it an ideal alternative energy for mankind.Large enterprise workshops, supermarket chains and private enterprises all have advantageous roof resources. Most of these enterprises are large consumers of electricity. If the energy on the roof is reasonably utilized, it will be a huge potential wealth.For factories with large power consumption, installing photovoltaic power generation on the roof can effectively activate fixed assets, save peak electricity costs, obtain good electricity revenue, reduce the internal temperature of the factory, and promote energy conservation and emission reduction.
If you are worried that the factory will consume a lot of electricity,
Or the production will be affected by power restriction and shutdown,
You can try to install this product of SUNPRO POWER
The maximum power is 480W, 120 N-type mono-crystalline silicon batteries.
16-busbars design, better transmission efficiency, maximum efficiency up to 22.20%.
Anti-PID. Low LID. Minimize the influence and probability of light decay.
Quiet operation, no need to worry about noise pollution.
Flexible installation, both on the ground and on the roof, making effective use of space.
No additional raw materials, no emissions, and electricity can be generated 12 hours a day.
Longer service life, 12-year warranty, 25-year performance guarantee.
Strong environmental pressure resistance, 2400Pa wind load, 5000Pa snow load.
The battery can operate at a temperature of - 40~+85 ℃, and the normal operating temperature of the battery is 45 ± 2 ℃.
It has won TÜV, CE, ISO and other international quality certification and fire protection certification to ensure that the product is put into efficient operation.
It happens that today is March 15.
In terms of after-sales service, SUNPRO POWER,
It has a 12-year warranty and a 25-year performance guarantee,
It is a strong guarantee to deal with the problems in the use of the buyer.
Sunpro always insists on:
"Build brand with integrity and win public praise with quality"
If you are interested in solar energy,
For more product information,
Welcome to contact us
[Disclaimer]
1. Some of the pictures and materials used in the article are from the network and are deleted in infringement.
2. The text and pictures are for readers' reference only. Please refer to the actual situation.
Nouvelles connexes
Re‑elected Consecutively! Sunpro Power Reappears on BNEF Tier 1 List for Q3 2026-08-21 0
Sunpro Power’s PV Modules Earn Authoritative Certifications From TÜV SÜD, Robust Quality Fuels Global Market Expansion 2026-06-26 0
Shine Bright in Munich! Sunpro Power Showcases High-Efficiency Modules at Intersolar Europe 2026 2026-06-24 0
TÜV SÜD and Sunpro Power Sign ESG Strategic Cooperation Agreement to Empower Green Industrial & R&D Upgrading 2026-06-10 0
Powerful Lineup Debuts in Shanghai! Sunpro Power’s High-Efficiency Modules Shine at SNEC 2026 2026-06-09 0
Sunpro Power Secures Spot Again on BNEF Tier 1 List for 2026 Q2 2026-06-09 0
Hardcore Lineup Lands in Manila! Sunpro Power High-Efficiency Modules Shine at Solar & Storage Live Philippines 2026 2026-05-19 0
Hardcore Certification! Sunpro Passes TÜV Thresher Test, Reliability Receives Endorsement 2026-04-28 0
Smart Energy in Vienna! SUNPRO POWER Presents High-Efficiency Modules at Solar Solutions 2026 2026-04-23 0
Green Energy Crosses Borders! SUNPRO POWER’s High-Efficiency Modules Shine at RE+ México 2026 2026-04-16 0
Hardcore Lineup Shines in Guangzhou! SUNPRO POWER’s High-Efficiency Modules Debut at the 139th Canton Fair 2026-04-15 0
Sunpro Earns Multiple ISO Certifications, Forging a Solid Foundation for Development with Rigorous Management 2026-03-06 0
Efficiency and Aesthetics in One: SUNPRO POWER's High-Efficiency Modules Shine at Key Energy 2026 Italy 2026-03-05 0
Major Certification! Multiple Sunpro TOPCon Modules Awarded France's PPE2 Carbon Footprint Certification, Unlocking the Green Pass to the French Market 2026-03-03 0
2026 Tier1 Q1 Ranking Announced | Sunpro Power Maintains Its Leading Position 2026-02-25 0
Kicking Off 2026 with a Grand Debut! Sunpro power Makes a Powerful Appearance at Intersolar Africa 2026, Illuminating Africa's Energy Future! 2026-02-03 0
Perovskite Solar Technology Achieves Major Breakthrough! Durability Challenge Conquered 2026-01-19 0
Poland's PV Target: 59.1GW by 2035, Emerging as a Key Driver of Europe's Energy Transition 2026-01-09 0
Sunpro Retains BloombergNEF Tier 1 PV Module Manufacturer Status for Q4 2025 2025-12-16 0
A Perfect Blend of Aesthetics and Efficiency! Sunpower Energy's High-Efficiency Modules Shine at French PV Exhibition 2025-12-11 0