Powerful Lineup Debuts in Shanghai! Sunpro Power’s High-Efficiency Modules Shine at SNEC 2026

As photovoltaic technology draws global attention, a grand feast featuring high efficiency, reliability and sustainable energy has kicked off in Shanghai.

On June 3rd, SNEC 2026 grandly opened at the National Exhibition and Convention Center (Shanghai). Sunpro Power showcased a full range of core exhibits at Booth D680, Hall 7.1. With cutting-edge technological strength and superior product quality, the company presented world-leading PV solutions to global clients, demonstrating the outstanding capabilities of China’s photovoltaic industry.

At this year’s SNEC, Sunpro Power displayed a complete lineup of PV modules and smart energy products covering residential, commercial & industrial (C&I), large-scale power stations and special application scenarios, delivering high performance and exceptional reliability to meet diverse market demands.

As our flagship benchmark product, this bifacial module sets a new standard for high-efficiency PV with top-tier configurations, boasting a conversion efficiency of 24.43% and ranking among the industry’s elite. Adopting advanced Back Contact (BC) technology, it eliminates front-side shading loss caused by grid lines. Equipped with double-glass high-transmittance encapsulation, it achieves remarkable rear-side power gain and substantially higher power generation compared with conventional modules.

Featuring excellent anti-microcrack performance, superior temperature coefficient and high load resistance, it operates steadily in complex climatic regions worldwide. Backed by a 15-year product warranty and a 30-year linear power output warranty, it is an ideal choice for large-scale ground power stations, C&I distributed PV systems and high-end residential PV projects.

Powered by back contact technology, this module reaches a conversion efficiency of 23.76%. Built with partial shading optimization design, it effectively cuts power generation losses from partial shading. Its sleek all-black integrated design combines elegant appearance with superior performance, making it widely applicable for residential and C&I scenarios.

Tailored for large-scale ground power stations and large C&I projects, this module delivers an ultra-high power output of 725W with a conversion efficiency of 23.34%. Leveraging bifacial TOPCon technology, it performs excellently under high temperatures and weak light conditions. Maximized bifacial power gain boosts overall power generation of power plants, while the 30-year warranty safeguards long-term returns for large-scale projects.

A plug-and-play star product designed for mid-to-large high-end residential and C&I distributed PV projects. With an optimal dimension of 1960mm, it balances high power output and flexible installation. Adopting N-type bifacial TOPCon technology, it achieves a maximum conversion efficiency of 23.17% and a bifacial gain of up to 15%, greatly enhancing system power generation. Its black frame and fully transparent design create a seamless visual effect, blending perfectly with building facades.

Not all PV projects can be installed on standard rooftops. Challenges such as insufficient load-bearing capacity of old factory buildings, anti-glare requirements for areas near airports, integrated farming and power generation for agricultural greenhouses, and curved rooftops call for customized solutions. Sunpro provides targeted products for these special application scenarios.

Specially developed for areas around airports, transportation hubs, roadside buildings and light-sensitive zones. It offers a power output of 460W and a conversion efficiency of 23.02%. Equipped with N-type bifacial TOPCon technology, it maintains stable performance under high temperatures and weak light, with additional power gain from the bifacial design. It features outstanding anti-glare performance: the reflected brightness is as low as 600 cd/m² at a viewing angle of 10° to 30°, effectively eliminating light pollution and ensuring the safety of airport navigation, traffic vision and surrounding environments.

Created exclusively for agrivoltaic systems, this module has a power output of 300W and a conversion efficiency of 15.01%. With a high light transmittance of 40%, it allows sunlight to reach crops beneath, realizing the model of "power generation on the top and crop cultivation below". Supported by N-type bifacial TOPCon technology, it increases system power generation while maximizing land utilization efficiency. Its lightweight structure and excellent light transmission make it suitable for greenhouses, tea plantations, orchards and other agricultural sites, enabling mutually beneficial development of clean power and agriculture.

A benchmark lightweight flexible PV product. Featuring a frameless and ultra-thin design, it weighs only 5.8kg and supports a minimum bending radius of 0.5m, ideal for old building rooftops, curved and irregular surfaces, yachts and RVs. With a conversion efficiency of 20.7% and advanced UV-resistance and anti-microcrack technologies, it ensures high power generation and excellent weather resistance. Its power density ranges from 191.6W/㎡ to 206.7W/㎡. The lightweight and highly flexible design breaks the installation limitations of traditional modules, providing efficient green energy solutions for special distributed PV scenarios.

We deliver systematic solutions with full-process intelligent management. Module-level power optimization and active safety protection effectively improve power generation efficiency and operational stability of PV plants. Power optimizers resolve issues including shading and performance mismatch to raise overall system output. High-efficiency PV inverters adopt intelligent algorithms and pure sine wave technology to deliver stable power equivalent to grid electricity.

Driven directly by solar power with zero operating cost, it serves as an ideal off-grid water pumping solution. Widely used for farmland irrigation, pasture water supply and water intake in remote areas, it provides cost-effective and reliable clean water solutions for power-short regions worldwide. Combining high-efficiency permanent magnet motors and intelligent control systems, it features superior pumping efficiency and a longer service life than conventional water pumps. It runs purely on solar energy without grid connection, incurring no operational expenses.

To pursue extreme PV efficiency, quarter-cut cell technology has become a key breakthrough direction. Sunpro’s brand-new quarter-cut modules adopt high-density packaging and advanced cell cutting technology to reduce shading loss and maximize power generation within limited space. Meanwhile, solar-storage integration has become a vital approach to solve the problem of PV curtailment. It realizes peak shaving and valley filling, increases self-consumption rate, curtails PV power abandonment, and helps C&I users achieve energy independence and maximize economic benefits.

Designed for large-scale ground power stations and C&I distributed PV projects, this module reaches a maximum power of 670W and a peak conversion efficiency of 24.80%, staying at the forefront of the industry. Equipped with advanced quarter-cut cell structure and bifacial TOPCon technology, it delivers higher power density and superior anti-shading performance. The bifacial gain hits up to 15%, boosting system power generation and lowering levelized cost of electricity (LCOE). With an excellent temperature coefficient of -0.26%/°C and great weak-light performance, it maintains stable and high output under high temperature and low light conditions. The silver frame and fully transparent design balance practicality and visual harmony for engineering applications.

Customized for large C&I facilities and utility-scale energy storage power stations. Adopting advanced DC non-parallel design and high-efficiency liquid cooling technology, it achieves a 100% depth of discharge (DOD) and a system conversion efficiency of over 90%. It is equipped with a high flame-retardant enclosure that meets the 2-hour fire resistance standard, as well as integrated full-set BMS and PCS protection systems. Supporting modular scalable installation and millisecond-level rapid grid dispatching, along with big data-based fault early warning, it provides high-yield, ultra-safe and user-friendly energy storage solutions for C&I sectors and power grids.

As the world’s largest and most influential PV exhibition, SNEC serves as a crucial platform for Sunpro Power to connect with global clients and showcase the strength of Made-in-China PV technology. Holding the BloombergNEF Tier 1 PV Manufacturer certification and owning a comprehensive global service network, Sunpro Power has supplied high-quality PV products and solutions to over 100 countries and regions across the globe.

This exhibition is not only a stage to display our technological prowess, but also a bridge to deepen cooperation with global partners. We welcome you to visit our booth D680, Hall 7.1 at the National Exhibition and Convention Center (Shanghai) to discuss industry trends, share global application experience, and jointly build a more efficient, intelligent and sustainable green energy ecosystem.